XAR^®

- More perspectives with wear-resistant steels

XAR^®

- More perspectives with wear-resistant steels -

XAR^® (eXtra Abrasion Resistant) steels from thyssenkrupp Steel Europe are the solution for applications where wear is a key factor.

XAR^® is available in various grades from 300 HBW to 600 HBW and plate thicknesses from 4,00 mm to 100 mm, tailored to particular applications, e.g. mining equipment, earthmoving machinery, steel mill and cement plant equipment, agricultural machinery, etc.

New: XAR^® 400 and XAR^®450 plates can also be supplied as cut-to-length plates in thicknesses from 4,00 up to 8,00 mm. Due to their very close thickness tolerances of ±0.008’’ (±0,2 mm) they offer weight reduction benefits as well as advantages in terms of cold forming.

Properties of XAR^®

- Higher wear resistance

- Good cutting and welding characteristics

- Better formability

- Lower costs

Overview XAR^® steels

XAR® 300

XAR^® HT

XAR^® 400

XAR^® 400 W

XAR^® 400 HR

XAR^® 450

XAR^® 500

XAR^® 600

Wear-resistant special structural steel, hardened/quenched and tempered

Steel Grade Designation	Standard Designation	FOUR HIGH MILL PLATES		CUT TO LENGTH PLATES
Steel Grade Designation	Standard Designation	THICKNESS¹ From_to in mm	WIDTH¹ From_to in mm	THICKNESS¹ From_to in mm	WIDTH¹ from_to in mm
XAR^®HT	Special mill grade	40.0 - 100.0	3,300
XAR^®400 HR	Special mill grade	4.0 - 25.0	3,300
XAR^®400 W	Special mill grade	4.0 - 40.0	3,300
XAR^®400	Special mill grade	4.0 - 100.0	3,300	4.0 - 8.0	1,500
XAR^®450	Special mill grade	4.0 - 100.0	3,300	4.0 - 8.0	1,600
XAR^®500	Special mill grade	4.0 - 100.0	3,300
XAR^®600	Special mill grade	4.0 - 50.0	3,300